Drill bit for Masonry or Concrete

Drill diameter: 16.0mm
Packaging: Carded 1
Drill bit: TCT (Tungsten carbide tipped)

Application:

The drill bit is used to drill holes in masonry or concrete, thanks to the uniquely designed TCT (tungsten carbide tipped) point.

A percussion (hammer action) drill with a 3 jaw chuck is required. Preset the depth gauge on the drill to achieve the correct depth before drilling into walls.

TIP:
Have a wall scanner (detector) ready before drilling into walls.

CAUTION:
Do not use the drill bit with a rotary hammer. The impact energy will break the conversion chuck.

consider safety for your health and the people around you
General safety suggestions: It is advisable to always have the following items nearby and in a good condition Eye protection clean and scratch free Hearing protection quality earmuffs Dust masks discard old and dirty masks Gloves for easy handling of material and hand protection

Wear Gloves	Eye Protection	Hearing Protection	Dust Mask