Artesania New MicroShapers MicroShapers D [27305]

This is the Artesania New MicroShapers MicroShapers D [27305]

TheMicroShapers D or Micro Shapers D, belonging to theMicro Toolscollection, are an exclusive high quality stainless steeltooldesigned by the technical team of Artesana Latina.

This set of Micro Shapers D allows you to shape/profile bothwoodandplasticstrips, perfect for creating different shapedmouldingsto decorate yourmodels.

Each set consists of three plates with about 15/16 shapes per plate, so you can get more than 45 different reliefs and designs on yourminiatures.

The tool works by running it over the wooden or plasticstripseveral times until the desired shape is obtained.

DIMENSIONS OF THE MICRO PROFILING MACHINES D

The sizes that you can find in the D type micro profiling machines are the following:

1×3 mm, 1×4 mm, 1×5 mm, 1.5×1.5 mm, 1.5×2 mm, 1.5×3 mm, 1.5×6 mm, 2×2 mm, 2×3 mm, 2×4 mm, 2×5 mm, 2×6 mm, 3×3 mm, 4×4 mm, 5×5 mm and 6×6 mm.

NOTE:Before using the micro profiler, it is advisable to use sandpaper to remove any burrs, roughness or small irregularities. To do this, glide gently in one direction only, upwards.