The Professional Cabinet Saw is SawStops top selling cabinet saw, offering unmatched fit and finish and best-in class cutting performance.

30-INCH T-GLIDE FENCE ASSEMBLY: The 30-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.

UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0. 010 maximum gap.

DUST COLLECTION: 99% dust collection is delivered above the table with the included dust collection blade guard, and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4 port.

SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.

RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.

3HP MOTOR: The 3HP motor gives you the extra power you need to quickly rip most materials you come across

Features

30″ Premium Fence System provides smooth operation, precision measurement and sure lockdown without deflection.
Unmatched fit and finish with a keen attention to detail make the Professional Cabinet Saw SawStop’s most popular saw.
SawStop Safety System stops on contact with skin.
ASSEMBLY: 3HP Professional Cabinet Saw with 30 Premium fence system, rails & extension table
Dimension: 61 3/4″ w, 31 1/8″ d, 34″ h

Includes

(2) Cast Iron Extension Wings
(1) Miter Gauge
(1) Micro Blade Guard (1.75HP Models)
(1) Dust Collection Blade Guard (3HP Models)
(1) Riving Knife
(2) Blade Wrenches
(1) Push Stick
(1) 10 Blade
(1) Standard Lockdown Insert
(1) Standard Brake Cartridge
(1) Owners Manual
(2) Hardware Packs
(1) 3mm Hex Key
(1) 5mm Hex Key
(1) 8mm Hex Key
(1) Blade Spacing Adjustment Gauge

Specifications

30″ Rip Capacity: PCS175 or PCS31230 -PFA30: 30″ Premium Fence Assembly
Motor Option(s) (60Hz TEFC): 1.75 or 3 HP available
Overall saw dimensions 30 in: 61 3/4″ W x 31 1/8″ D x 34″ H
Motor Configuration 2: PCS31230: 3 HP, 1 phase, 230v, 13 A, Plug: NEMA 6-15P w/9 cord
Saw body footprint: 19 3/8″ W x 19 3/8″ D (Cabinet)
Cast iron table: 20″ W x 27″ D
Extension wings: 12″ W x 27″ D each
Cast iron table (w/ extension wings): 44″ W x 27″ D
Extension table 30 in: 12″ W x 27″ D
Shipping weights – w/ 30 in fence systems: 455 lbs / (2 Boxes)
Shipping dimensions (saw body only): 42W x 31D x 30H
Shipping weight (approx.): (table saw only) 400 lbs
Assembled weights – w/ 30 in fence systems: 380 lbs
Weights – table saw only: 335 lbs
Blade: 40-tooth, prof. grade, 5/8″ arbor
Blade diameter: 10″
Blade tilt: Left
Blade kerf: 0.118″ (3mm)
Blade plate thickness: 0.078″ (2mm)
Max. depth of cut, blade at 0: 3 1/8″
Max. depth of cut, blade at 45: 2 1/4″
Max. rip, right of blade – 30 in: 30″ (w/ 30″ rails)
Max. rip, left of blade: 12″
Dado diameter: 8″ (requires dado brake cartridge & insert)
Dado max. width: 29/32
Arbor diameter at blade: 5/8″
Main bearing size: 62mm OD x 30mm ID
Second bearing size: 52mm OD x 25mm ID
Table in front of blade (max. elevation): 10 1/4″
Table behind blade (max. elevation): 7 1/2″
Arbor Runout: 0.001″ Maximum allowable runout
Table flatness measured diagonally: 0.010″ Maximum gap
Blade alignment with miter slot: 0.010″ Maximum displacement
Deviation of miter gauge indexing stops from actual: 0.25
Alignment between splitter and blade: 0.010″ Maximum difference
Miter slots T-shaped: 3/4″ at top, 1″ at bottom, 3/8″ deep
Miter slots center: 11 1/8″ center-to-center
Miter slots info: 5 1/2″ (arbor flange to center of right slot)
Dust collection port diameter: 4″
Riving knife / splitter thickness: 0.090″ (2.3 mm)
Dust collection blade guard (standard on 3 HP saws): polycarbonate, extends 1-3/16″ right of blade
Blade guard: (dust collection) port diameter 1-1/2″ Outside, 1-1/4″ Inside
Insert: zero clearance, phenolic core, melamine surfaces
Hand wheels: 7″ diameter, cast iron w/ chrome handle
Belts: 2 V-ribbed belts – arbor b. static dissipative.