Carltsoe Safety CS Unitec Ex208-120/130A Aluminum Bronze Non-Sparking, Low-Magnetism, Corrosion Resistant Spanner Fixed Wrench 4-3/4″ – 5-3/16″ (120-130 mm) (208U-120/130A)

CS Unitec Ex208-120/130A Description

CS Unitec’s non-sparking, non-magnetic, corrosion-resistant safety hand tools are manufactured from special Aluminum-Bronze (AlBr) or Copper-Beryllium (CuBe2) alloys. All CS Unitec Safety Tools are backed by a lifetime warranty against defects in workmanship. If any CS Unitec safety tool breaks or fails to perform under normal use or service, it will be repaired or replaced at no charge.* CS Unitec safety tools are high quality manufactured in an ISO 9001:2015 environment and are TUV materials certified. They comply with ATEX Directives for Ex Zones 0, 1 and 2 (Flammable Gas, Mists or Vapors); Zones 20, 21 and 22 (Combustible Dusts); and M1 and M2 for mining. All hand tools are drop forged to produce the highest quality and durability. With over 4,000 SKUs offered, CS Unitec safety tools fit a wide range of applications. Non-Sparking applications include: Ex zones where hazardous, flammable or combustible vapors, liquids, dusts or residues may be present. Non-Magnetic applications include: MRI/NMR, nuclear products, electronic manufacturing, and other sensitive equipment. Corrosion resistant applications include: use in desalination plants, chemical/paper manufacturing, and shipyards. *Any misuse, abuse or normal service wear is not covered under this warranty.

CS Unitec Ex208-120/130A Includes

• (1) Pipe Wrench Non-Sparking

CS Unitec Ex208-120/130A Features

• Non-Sparking, Non-Magnetic & Corrosion-Resistant Tools for Use in Hazardous Environments, ATEX and EX Zones
• Lifetime Warranty, ISO 9001:2015 manufactured, TUV certified
• Non-Sparking alloys are designed to eliminate the risk of sparks at sites where explosive atmospheres (flammable or combustible vapors, liquids, dusts or residues) may be present
• The non-magnetic feature of these hand tools also makes them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets. Copper Beryllium recommended for safer non-magnetic applications and around sensistive equipment.
• These corrosion-resistant tools are suitable for use in shipyards, laboratories, pharmaceutical, and food product manufacturing.
• When using a heavy-duty Pipe Wrench, maintain a gap between the back of the hook jaw and the pipe. This concentrates the pressure at the jaw teeth only and produces the maximum gripping force and aids ratcheting action. If possible, always pull rather than push on the pipe wrench handle and maintain a proper stance with feet firm to hold balance. Pipe Wrenches are designed to turn or hold pipe; never use a Pipe Wrench to bend, raise or left a pipe. Select a Pipe Wrench with sufficient capacity and leverage; never use a pipe extender or “cheater”.
• Do not use a Pipe Wrench as a hammer, nor strike a Pipe Wrench with a hammer. Inspect Pipe Wrenches periodically for worn or unsafe parts and replace them.
• Not as durable as CuBe
• Low magnetism due to minimal ferrous components. Appropriate for non-critical non-magnetic applications

CS Unitec Ex208-120/130A Specifications