Dimar DIM-101RC4-16 5/8in Dia Carbide Tipped Template Bit Centre Ball Bearing 2 Flute 1/4in Shank

Overview:This ultimate double flute template bit with a central ball bearing is recommended to get greater balance and when finer finish is a priority. This bit was designed for high production work with maximum chip clearance for faster feed rates. The ball bearing guide will ride along with the template, and the carbide teeth will cut into the material at the exact diameter of the bearing, hereby “copying” the design flush with the bearing’s diameter.Features:Perfect for vertical and gradual plungingIt cuts most composite materials, plywood, hardwoods, and softwoodsUse on hand-held routers, and table-mounted portable routersRadial relief technology-enabled: ensures minimal loss of carbide diameter when sharpening, increases tool life, and saves almost 8x the cost of regular sharpeningSpecifications:Tool ID: 101RC4-16Diameter (D): 5/8″Shank (d): 1/4″Number of Cutters: 2Technology: Carbide TippedMachine: Hand Router, Table RouterMaterial: Soft Wood, Hard Wood, Composite Material, Plywood