Festool Plunge Cut Track Saw TS 75 EQ Plus FS Kit w/ 55″ & 75″ Guide Rails, Accessories, and Guide Rail Bag TS75KIT

Festool Plunge Cut Track Saw TS 75 EQ Plus FS Kit w/ 55″ & 75″ Guide Rails, Accessories, and Guide Rail Bag TS75KIT

Power and precision in the palm of your hand.

Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4″ thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.

• When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
• Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
• The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
• Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
• The TS 75 is our most powerful plunge cut saw, providing enough power to slice through the toughest of materials with little concern for swirl or burn marks.
• At 2 3/4 inch depth of cut, the TS 75 can power through thick stock with ease.
• Spring-loaded riving knife (splitter) retracts into the housing during plunge cuts. The riving knife keeps the cut kerf open so that the material does not pinch the blade.
• Variable speed allows you to match the speed of the saw to the material. The electronics also maintain a consistent speed under load, improving cut performance and protecting the saw’s motor from thermal and current overload.

Accessory KitSYS3 M 137 FS/2-Set -Everything included to maximize versatility.

Everything that can make the guide rail even better in one Systainer: Fastening clamps, angle stop, deflector, limit stop, and rail connectors.

• The guide rail accessories are stored in the Systainer in a clearly organised way
• Permanent organization and high visibility
• All in one place
• Simple, compact transportation

Guide Rail FSFS 1400/2-LR 32

The FS FS 1400/2-LR 32 Guide Rail (55 inches) was designed specifically for use with Festool Routers and the LR 32 Hole Drilling System to construct cabinets using the European frameless 32mm system for shelf pins and hardware. Also, use the LR 32 System for line boring, or setting shelf pins in panels up to any length. Festool FS Guide rails are available in eight different lengths from 32 inches to 118 inches (800 – 3000 mm), providing the right rail for every application. For cutting applications, the integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across. Guide rails can be easily connected using the accessory guide rail connectors for a rigid, secure and continuous connection. Guide rails make work easier by taking the tool to the work, and save time and money by eliminating laborious measurements, rework and wasted material. Use the FS 1400/2-LR 32 Guide Rail (55 inches) with the Festool Plunge cut saw to cut material up to 49 inches. Connect rails using Festool Guide Rail Connectors to make limitless cuts.

• Combine this guide rail with the Festool LR 32 Hole Drilling System to efficiently build European style 32mm cabinets
• Quickly and easily align and machine holes for shelf pins and 35 millimeter cup hinges
• A fully integrated system, use your Festool routers, plunge saws, or jigsaws with the guide rail for expanded capability
• Guide strip reduces friction between the tool and guide rail for easier, more fluid cutting action
• the FS 1400/2-LR 32 Guide Rail (55 inches) with the Festool Plunge cut saw to cut material up to 49 inches
• for producing hole lines

Guide RailBagFS-BAG 1400

Protect your investment in Festool Guide Rails with the durable nylon Carrying Case for Festool Guide Rails. For convenient and protected transport or storage of up to two FS 1400/2 or shorter guide rails. Durable nylon construction protects your guide rails from scratches and dings. Guide rails sold separately.

• Durable nylon construction protects your guide rails from scratches and dings during transport or storage
• For convenient and protected transport or storage of up to two FS 1400/2 or shorter guide rails.
• carrying bag with shoulder straps for easy transport of guide rails
• Up to length of FS 1400/2

Specifications

• Idle engine speed: 1350 – 4400 RPM
• Min. dust extraction connection dia.: 1.06 in
• Saw blade diameter: 8-1/4″ (210 mm)
• Drive type: 120 VAC
• Cutting depth at 45: 2-1/8″ (55 mm)
• Dust extraction connection dia.: 1-1/16″/1-7/16″ (27/36 mm)
• Power consumption: 1600 watt
• Cutting depth: 0″ – 3″ (0 – 75 mm)
• Angular range: 0 – 47
• Cable length: 13.123 ft (4 m)