Klein Tools, D502-10-INS, Pump Pliers, 10 in; Jaw Capacity 1.75 in; Insulated, High-Dielectric Plastic

These Klein Tools 10-Inch Insulated Pump pliers feature integral guards to help prevent accidental contact with conductive wire and a wide jaw capacity for versatility. They are individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools and clearly marked with the official 1000-Volt rating symbol. The handles feature two layers of insulation to provide protection against electric shock.

Warnings

• Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
• Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
• Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
• Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
• Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.

Features

• Pliers are individually tested to meet or exceed ASTM F1505-16(2021) and IEC 60900: 2018 standards for insulated tools, and clearly marked with the official 1000-volt rating symbol
• Integrated guards help prevent accidental contact with live wire
• Secure Tongue and Groove Design For Non-Slip Grip
• Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
• Integral guards help prevent hand contact with conductive parts
• Forged in the USA using US steel
• A flame retardant, impact-resistant, bright orange outer coating
• Two layers of insulation provide protection against electric shock
• Six versatile jaw positions with secure tongue and groove design for non-slip grip – even with heavy pressure

• Overall Length: 10.3 in (26.2 cm)
• Jaw Capacity: 1.75 in (4.5 cm)
• Jaw Length: 1 in (2.5 cm)
• Jaw Width: 0.484 in (1.2 cm)
• Handle Length: 5.5 in (14 cm)
• Width: 4.6 in
• Height: 0.484 in
• Weight: 1.0 lb
• Material: Induction Hardened Steel
• Handle Material: High-Dielectric Plastic
• Handle Finish: 2-Layer Insulation
• Insulated: Yes
• Standards: IEC 60900, ASTM F1505
• Type: Pump
• Handle Color: Orange

Downloads

Spec Sheet

Instructions

InsulatedTools.pdf