Milwaukee 2855P-20 M18 FUEL 1/2″ Compact Impact Wrench w/ Pin Detent (Tool Only)

The M18 FUEL 1/2″ Compact Impact Wrench w/ Pin Detent is the most compact in its class, delivering you more power, the most access in tight spaces at only 4.9″ in length, and maximum workspace visibility. This cordless impact wrench features a POWERSTATE Brushless motor that generates up to 250 ft-lbs of fastening and nut-busting torque, providing you with the power required for installation and removal, even in confined spaces. The MILWAUKEE 1/2″ impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18 REDLITHIUM battery pack (not included) fits M18 tools, delivering more work per charge and more work over the life of the pack.

Standard Equipment:

• (1) M18 FUEL 1/2″ Compact Impact Wrench w/ Pin Detent Bare Tool (2855P-20)

Optional Accessories:

• Milwaukee 18V Batteries & Chargers
• Fastening Accessories

Specifications:

• Rating: 18 Volt
• Anvil Type: 1/2″ Square w/ Pin Detent
• Nut Busting Torque: 250 (ft-lbs)
• Fastening Torque: 250 (ft-lbs)
• Length: 4.9″
• Width: 2.56″
• Height: 7.95″
• Weight: 2.4 lbs

Features:

• FTool features pin detent for locking sockets in place securely, especially while working overhead
• 4.9″ in length provides most access in tight spaces
• The POWERSTATE Brushless motor delivers up to 250 ft-lbs of nut-busting torque
• Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
• 4-Mode DRIVE CONTROL provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
• AUTO SHUT-OFF control prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque
• Bolt Removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
• Mode 1 RPMs: 0-900; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400
• Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500
• REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
• Works in up to to 69kV environments
• Compatible with all M18 batteries & Chargers