Mold Max Fast Cat 30

Fast Cat 30 silicone rubber catalyst will accelerate the cure time of Mold Max 30 silicone rubber. Used in place of (or in combination with) Mold Max 30 regular Part B catalyst, Fast Cat 30 will reduce the demold time from overnight to as little as 30 minutes.

Instructions

Fast Cat 30 is for Mold Max 30 silicone ONLY.

Safety – Use in a properly ventilated area (room size ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Store and use material at room temperature (73F / 23C). This product has a limited shelf life and should be used as soon as possible.

Measuring – When used alone as Part B for Mold Max 30 (100A:10B pbw mix ratio) instead of regular catalyst, Fast Cat 30 reduces the pot life of Mold Max 30 from 45 minutes to 10 minutes and the demold time from 24 hours to 1 hour. If the amount of Fast Cat 30 Part B is increased to 15% (100A:15B pbw), the pot life is reduced to 5 minutes and the demold time to 30 minutes.

Mixing – Add desired amounts of Fast Cat 30 and/or regular Mold Max 30 Part B to Mold Max 30 Part A by weight and mix thoroughly. Important: Be sure to scrape the sides and bottom of the mixing container several times while mixing. Be aware of your working time with reduced pot life. Note: results may differ due to variables in temperature, humidity, etc.

Note: Working time is reduced in proportion to the amount of Fast Cat 30 added. Adding Fast Cat reduces the library and production life of the cured rubber vs. our Mold Max regular catalyst

SDS