Stalsen MAGMA hide leather cut level E welder’s gauntlet Pack 10

GLOVE FEATURES

Top grade cow grain leather

Wide fit for ease of donning

Heat resistant Kevlar stitching

Superbly soft and supple leather

Pigment free to retain flexibility

Increased length for extra protection

Cut resistant kevlar lining around the palm of the glove to protect the wearers from cut risks

GLOVE SPECIFICATION

Code: MX298

Size range: 8/M 11/XXL

Leather: Top Grade Cow Grain Leather

Stitching: Kevlar

Liner: Kevlar

GLOVE STANDARDS

EN388:2016 – Mechanical Hazards

Protection against mechanical hazards in respect of physical and mechanical stress caused by abrasion, blade cut, tear and puncture. The table below indicates the gloves resistance to:

2 = Abrasion

X = Blade Cut* (coup)

3 = Tear

2 = Puncture

E = Straight Blade Cut (EN ISO 13997)

NOTES:

Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.

*Gloves should not be used when working with serrated blades

EN407: 2020 – Thermal risks (heat and/or fire)

This standard specifies thermal performance for protective gloves against heat and/or fire. The table below indicates the gloves resistance to:

4 = Flammability

1 = Contact heat

3 = Convective heat

X = Radiant heat

4 = Small splashes of molten metal

X = Large splashes of molten metal

NOTES: Where 1 indicates the lowest performance. X that the test was not performed or not possible. A 0 rating indicates that during the test level 1 was not reached.

EN12477 – Manual Metal Welding Hazards

Rating: Type A