Tajima VARIX Smooth Cut Snips Manual Cable and Conduit Cutting Snips with Safety Lock (DK-BM50)

Key Features

Cuts Tough Plastic Cleanly Large forged blades are built to slice through plastic conduit, cable ducts, and wire molding without the ragged edge you get from lighter snips. That means less cleanup and faster installs. One-Handed Control The spring mechanism opens the Tajima VARIX Smooth Cut Snips after each cut, and the one-touch safety lock makes it easy to pocket or store between tasks. Good setup for repetitive cutting on trim-out work. Secure Grip on the Job Non-slip elastomer handles help you keep control when you’re working fast or wearing gloves. Deburring grooves and a lanyard hole add practical jobsite touches instead of gimmicks.

Overview

The Tajima VARIX Smooth Cut Snips, model DK-BM50, are professional cutting snips built for electricians, low-voltage installers, and anyone trimming plastic conduit, cable ducts, cord covers, or wire molding. This is a snips tool designed for cutting plastic conduit and cable management material cleanly. If your work involves neat finish cuts on non-metal cable routing products, this tool is aimed right at that job.

What matters here is blade shape and cutting force. Tajima uses robust large blades with a Japanese blade design focused on sharpness and strength, so these snips are made to bite through resin pipe and plastic raceway material without crushing it. The listed capacity is up to 1.26 inches wide for wire moldings made from plastic materials and up to 1.18 inches in diameter for plastic corrugated conduit or flexible conduit. For cable work, they are also rated for AWG 10, 5.5 mm, 3-core SOOW and SJOOW cable, which gives you a clear idea of where they fit in the field.

The spring-loaded mechanism is not just there for comfort. On repetitive cuts, it reduces the effort needed to reopen the handles, which helps keep your pace up during rough-in or finish work. Pair that with the one-touch safety lock and you get a tool that is faster to use and easier to put away between cuts. That matters when you’re up a ladder, moving room to room, or working out of a pouch instead of a bench.

Tajima also got the handle design right for real use. The non-slip elastomer grip gives you better control when your hands are dusty or you’re wearing light gloves, and the lanyard attachment hole is a smart addition for overhead work or crowded commercial jobsites where dropped tools become a problem fast. These are small details, but they’re the kind of details that separate a decent cutting tool from one you actually keep reaching for.

Another useful feature is the built-in deburring grooves. After the cut, you can clean up the edge instead of reaching for another hand tool, which saves time when you’re fitting conduit, raceway, or covers that need a cleaner finished edge. On jobs where appearance counts, especially exposed runs and retrofit work, that is a practical benefit.

At 0.4 lbs, these snips stay light enough for all-day carry without feeling flimsy. They are made in Japan, which lines up with Tajima’s reputation for sharp cutting tools and solid manufacturing. This is not a general-purpose demolition cutter or heavy metal snip. It is a purpose-built plastic conduit and cable duct cutting tool for users who want cleaner results and more control than a utility knife or basic shears can give them.

If you regularly install surface raceway, trim plastic cord covers, or cut flexible conduit on service and finish work, this tool makes sense. It is especially well suited for electrical, communications, security, and clean install work where cut quality matters. For rough chop-anything abuse, buy something else. For controlled, repeatable cuts in plastic materials, this is exactly the kind of specialist hand tool worth owning.

Clean Cuts for Conduit and Wire Molding

These snips are built around one job: making cleaner, more controlled cuts in plastic cable-management material than you can get from a knife or general shop shears.

• Rated for plastic wire molding up to 1.26 inches wide
• Rated for plastic corrugated or flexible conduit up to 1.18 inches in diameter
• Large forged blades increase cutting force for tough resin materials

Faster Repeats, Less Hand Fatigue

The spring-loaded action helps reopen the tool after each cut, which keeps your hand moving instead of fighting the handles back open every time.

• Spring mechanism supports repetitive cutting tasks
• One-touch safety lock secures the snips for storage and transport
• Good fit for punch-list, trim-out, and repetitive install work

Built for Controlled Handling

Handle grip and blade geometry matter on a tool like this. Tajima kept the weight down and gave it a secure feel, so the cut stays controlled instead of sketchy.

• Non-slip elastomer grips improve hold and control
• Light 0.4 lb weight is easy to carry and use all day
• Lanyard attachment hole helps secure the tool when working overhead

Purpose-Built Blade Design

This is not a do-everything cutter. It is a dedicated plastic-cutting snip designed to leave a better edge on the materials electricians and installers deal with every day.

• Japanese blade design focused on sharpness and strength
• Deburring grooves help clean up the cut edge
• Best suited to conduit, cable ducts, cord covers, and similar plastic materials

What’s in the Box

• (1) Tajima VARIX Smooth Cut Snips

Key Specifications

Built For

Electrical Low-Voltage Cable Management Plastic Conduit Cutting Wire Molding Installation Remodeling Service Work DIY / Hobbyist

Pro Tip

When you’re cutting surface raceway or cord cover, make your finish cut with the material fully seated in the blade curve instead of just nicking the front edge. You’ll get a straighter cut and make better use of the blade’s leverage.

Warranty & Support

No manufacturer’s warranty is listed for this product.

Tool Nut’s Take

Tool Nut’s Take

Why the Tajima VARIX Smooth Cut Snips Earn a Spot in the Bag

This is the kind of specialty cutter that saves time every single day if you work with plastic conduit, raceway, or cord cover.

• Who it’s for: Electricians, low-voltage installers, service techs, and remodelers who want cleaner cuts on plastic cable-routing materials.
• Why it stands out: The large forged blades, spring-loaded action, deburring grooves, and solid grip make it more useful than generic shears for this specific work.
• Worth knowing: This is a purpose-built plastic-cutting tool, not a universal cutter. If your main goal is neat conduit and wire molding cuts, that’s exactly why it makes sense.

Common Questions

• What materials are these snips designed to cut? They are designed for plastic materials such as conduit, flexible conduit, cable ducts, cord covers, and wire molding.
• What is the maximum cutting size for plastic wire molding? The listed capacity is up to 1.26 inches (32 mm) wide for plastic wire molding.
• Can they cut cable? Yes. They are rated for AWG 10 (5.5 mm) 3-core SOOW and SJOOW cable.
• Do they have a locking mechanism? Yes. They feature a one-touch safety lock and a spring mechanism for easier one-handed use.