TORK CRAFT GLASS & TILE DRILL 4MM TCGD04

TorkCraft – 4mm Glass & Tile Drill Bit

Size: 4 mm

Carded Pack: Qty 1

Application:

For precision drilling in glass, mirrors, ceramic and marble tiles. If the tile is on the wall, use a masonry bit to finish the hole once through the tile. If the tile is on the wall use a masonry bit to finish the hole once through the tile.

If drilling into extremely hard floor tiles or granite, choose the Tork Craft Diamond drill, TC1808 series for better results. Use slow speeds.

• For precision drilling in glass, mirrors, ceramic and marble tiles.
• No Hammer action
• 500 MAX RPM
• Tungsten carbide tip

INFO: If drilling into extremely hard tiles or granite, choose the TorkCraft Diamond Drill TC1808 series for better results. USE SLOW SPEED

WARNING: Using any tool can be dangerous. Always select the right tool for the job.

Specifications

TCGD04Drilling > Tile And Glass > Standard